AR-V6005FL is equipped with Intel Atom E640 processor and Intel EG20T PCH chipset for low power consumption and entry-level vehicle applications.
AR-V6100FL is embedded with Intel HM65 chipset and FC988PGA socket to support Intel Core i7 2710QE/i5 2510E/i3 2330E/ Celeron B810 processor. Based on Intel powerful 2nd Generation Sandy Bridge Core i CPU , AR-V6100FL is a powerful industrial-grade computing solution for all vehicle application, such as Fleet management, vision procession, Telemetric, Traffic safety control and numerous other vehicles. To use in rugged environment, AR-V6100FL is capable of operation at -20°C to 60°C and can withstand vibration up to 2G (follow IEC60068-2-64) and shock up to 50G 11ms (follow IEC60068-2-27).
AR-V6005FL and AR-V6100FL in vehicle computers are both with the power subsystem can be fully protected by over-voltage, over-current and surge protection which make them comply with E-Mark and ISO-7637 in-vehicle power standard.
AR-V6002FL fanless In-Vehicle computer is based on Intel Atom D425/D525 single /dual core processer.
AR-V6002FL is designed with standard power input for car battery of 12V/24V, capability to operate in rugged environment of -20 to 50 degrees, standard vehicle certification of CE, FCC class B and E-Mark 13, and can withstand shock and vibration up to 2G follow IEC60068, which allow system integrators to implement the accessories to fulfill vehicle application, such as Fleet management, Telemetric, Traffic safety control and numerous other vehicles.
Besides supporting standard 12V/24V car battery input, AR-V6002FL has many unique power management design, like 8 kinds of selectable delay timing for different purpose, power input monitoring to shut down system at low power to prevent accidentally drain out car battery, two kinds of trigger type to power on and off by car ignition or remote switch, and application programming interface to modify delay timing by software.
● Intel Atom D425/D525 processor
● Intelligent Power module with API for delay timing customization
● Fan less design with Heat pipe
● Display: VGA,
● Serial port：2*RS-232, 2*RS-232/422/485
● USB x 4, Mic-in/Audio, Remote power switch,
● Storage: CF card slot/ 2.5’’ HDD bracket
● GPIO: 4 in / 4 out
● 1 x GbE RJ45 LAN port with LED
● 2 x mini-PCIe expansion slot
● Optional module: GPS / WiFi/ Bluetooth / 3.5G module
● Changeable Fuse design
● CAN Bus support CAN 2.0A/2.0B
● Windows and Linux device driver and API for GPIO and CAN bus.
● Standard vehicle certification: CE, FCC class B, E-Mark
The AMB-IH61T1 is the new Mini-ITX industrial mainboard from Acrosser Technology that supports Intel Xeon processor and both of 2nd and 3rd generation Intel Core i7/i5/i3 desktop processor by Intel H61 chipset and LGA 1155 socket.
AMB-IH61T1 has two DDR3 SO-DIMM sockets to support up to 16GB of system memory. Onboard 18/24-bit dual channels LVDS interface support HD resolution LCD panel directly made it suitable for digital signage and panel PC applications.
Coming with Acrosser’s 7 years product longevity service.
AMB-D255T1, which carries the Intel dual- core 1.86GHz Atom Processor D2550. AMB-D255T1 features powerful graphic performance via VGA and HDMI, DDR3 SO-DIMM support, mSATA socket with USB signals and SIM slot, and a DC jack for easy power in. AMB-D255T1 also provides complete I/O such as 4 x COM ports, 6 x USB2.0 ports, 1 x GbE RJ-45 port, 1 x SATA port with power connector.
Acrosser designs AMB-D255T1 as the slim type with single layer I/O ports to make the board total height less than 20mm, with external AC/DC power adaptor which is very suitable for applications with limited space likes Digital Signage, POS or thin client system.
1. Intel D2550 Processor with NM10 Chipset
2. One 204-Pin DDR3 SO-DIMM Socket
3. 4 x COM, 6 x USB2.0, 1 x SATA II, 1 x Mini PCIe, 1 x GbE
4. Mini PCIe Expansion, SIM Card Socket
Acrosser Technology, the leading industrial computer manufacturer, has successfully integrated significant features into their In-Vehicle Computer series products. These features include i-Button 1- wire interface, combo connector and remote power control switch.
i-Button 1-Wire Interface for Driver ID and Sensors
Driver identification, temperature sensors, NVRAM, digital I/O and analog input are quite often used on vehicle and M2M applications. 1-Wire is a device communications bus system designed by Dallas Semiconductor Corp. that provides low-speed data, signaling, and power over a single signal.
At this time, there are approximately 40 1-wire devices available from Dallas Semiconductor Corp. 1-Wire devices can be grouped by their functions into several categories:
‧Identification plus temperature
‧Identification plus temperature logger
‧Identification plus temperature and humidity logger
‧Identification plus real time clock
‧Identification plus NV SRAM or OTP EPROM or EEPROM
‧Identification plus SHA-1 secure EEPROM
Thanks to the integration of 1-wire interface into Acrosser In-Vehicle Computers, so system integrators now can use one simple interface to connect variety devices which are often utilized in telematics applications. Beside the hardware interface, Acrosser also provide software API to write and read data to and from any kind of 1-wire devices.
Combo Connector Simplifies Many Cables Down to a Single Cable
Signals between a vehicle computer and a touch monitors include VGA, USB, audio and power supply of touch monitor. With a normal design, 4 cables are required. The all-in-one combo connector integrates all of these signals into one single cable. This significantly simplified the routing of the harness. Acrosser’s new in-vehicle computers and in-vehicle touch monitors are all featured with this advanced design.
Remote Power Control Switch, ON/OFF Control become More Flexible
All Acrosser’s In-Vehicle Computers are featured with a remote power control switch beside the power control by ignition switch. When this switch is installed and enabled by software, the switch works together with the ignition switch to control the power on/off of the computer. This has enabled the driver be able to turn off the computer without turning off the ignition. This feature is very useful in some application scenarios.
OS support for Windows XP, XP embedded and Windows CE, Linux allows flexibility. 1~255 seconds software programmable watch dog timer can wake system from unexpected failures and save technical service loads.
The 3.5” SBC, AR-B6051, which carries the Intel Atom E640 and E620. It supports DDR2 memory and capacity is 1GB. It’s the onboard design and it will avoid the risk of vibration and shock issue. Based on embedded concept, AR-B6051 has variety IO like 4 x serial port, 4 x USB, 2 x GbE and Mini-PCIe expansion. It offers the CF socket that embedded customers used to use, 1x SATA interface for the customers have large storage capacity request.
There is a Mini-PCIe expansion slot for customer’s expansion. As people know there is rapidly increasing request in wireless request, so Acrosser provides customer the option and customer can use the module directly without other carrier board. AR-B6051 also supports the CAN Bus function that is widely used in the industrial applications.
1. Intel Atom E640 1GHz/E620 600MHz
2. Onboard DDR2 1GB
4. 2 x GbE, 4 x COM, 4 x USB2.0, SATA, CF, CANBUS
5. MiniPCIe Expansion
AIV-HM76V0FL is protected with the most complete power input protection to adapt the harsh electrical environment in any kind of vehicle. Such protections are automotive transient voltage suppression, over/under voltage protection, over current protection, reverse voltage protection and automotive fuse.
The smart power management subsystem enables user to define the power on and off sequences through software interface or BIOS setting to meet any requirement of in-vehicle applications.
The AIV-HM76V0FL’s fanless thermal design provides the high reliability in vehicle applications. It utilizes advanced heat pipe, heat sink, and thermal pad to solve the problem of heat generated by CPU, Chipset, DRAM and power devices. This is a big challenge for designing a fanless computer what supports up to 45 Watts quad core of core i7-3720QM processors.
Acrosser also integrated two useful features to the AIV-HM76V0Fl as AR-V6100. The one-wire (i-Button) interface provides system integrators a low cost solution for driver ID, temperature and humidity sensors. And the combo connector combines VGA, audio, USB and DC 12V power output all in one connector so significantly simplify the harness between the AIV-HM76V0FL and Acrosser’s in-vehicle touch monitors.
About Industrial Computer
Long life, low power, fanless half size Intel ATOM/Vortex 486 ISA and PCI industrial PC CPU card with PC/104 slot, Industrial chassis, Card cage and backplane with 3, 4, and 6 slots are designed for harsh industrial environment. Acrosser industrial computers have been widely used in machine control, factory automation and power factory monitoring.
ACROSSER offers a comprehensive range of Embedded and PC-Based, Low cost, Low power, Fanless, Long life time, ISA Half Size , PCI Industrial Computers from Intel ATOM, VIA Eden, Pentium 4, Pentium-M, and industrial pc, Industrial chassis, backplane for slots CPU cards from 3, 4, 6, 7, 14 slots to 20 slots. ACROSSER’s full range Touch Panel PC together with these rugged automobile computer, Industrial Computers are the best solution for Industrial Automation, Factory Automation, Telecommunication, Instrumentation, CNC Machines, MMI, HMI(Human Machine Interface), CTI (Computer Telephony Integration), DVR (Digital Video Recorder), Machine Tools applications.