月份: 2012 年 12 月

In-Vehicle computer is based on Intel Atom D425/D525 single/dual core processer

embedded system, in vehicle computer, Industrial PC
embedded system, in vehicle computer, Industrial PC

AR-V6002FL fanless In-Vehicle computer is based on Intel Atom D425/D525 single /dual core processer.
AR-V6002FL is designed with standard power input for car battery of 12V/24V, capability to operate in rugged environment of -20 to 50 degrees, standard vehicle certification of CE, FCC class B and E-Mark 13, and can withstand shock and vibration up to 2G follow IEC60068, which allow system integrators to implement the accessories to fulfill vehicle application, such as Fleet management, Telemetric, Traffic safety control and numerous other vehicles.

Besides supporting standard 12V/24V car battery input, AR-V6002FL has many unique power management design, like 8 kinds of selectable delay timing for different purpose, power input monitoring to shut down system at low power to prevent accidentally drain out car battery, two kinds of trigger type to power on and off by car ignition or remote switch, and application programming interface to modify delay timing by software.

 

 

AR-V6002FL features:
● Intel Atom D425/D525 processor
● Intelligent Power module with API for delay timing customization
● Fan less design with Heat pipe
● Display: VGA,
● Serial port：2*RS-232, 2*RS-232/422/485
● USB x 4, Mic-in/Audio, Remote power switch,
● Storage: CF card slot/ 2.5’’ HDD bracket 
● GPIO:  4 in / 4 out
● 1 x GbE RJ45 LAN port with LED
● 2 x mini-PCIe expansion slot
● Optional module: GPS / WiFi/ Bluetooth / 3.5G module
● Changeable Fuse design
● CAN Bus support CAN 2.0A/2.0B
● Windows and Linux device driver and API for GPIO and CAN bus.
● Standard vehicle certification: CE, FCC class B, E-Mark

 

 

Intel Core i7/ i5/ i3 desktop processors AMB-IH61T1

The AMB-IH61T1 is the new Mini-ITX industrial mainboard from Acrosser Technology that supports Intel Xeon processor and both of 2nd and 3rd generation Intel Core i7/i5/i3 desktop processor by Intel H61 chipset and LGA 1155 socket.

AMB-IH61T1 has two DDR3 SO-DIMM sockets to support up to 16GB of system memory. Onboard 18/24-bit dual channels LVDS interface support HD resolution LCD panel directly made it suitable for digital signage and panel PC applications.
Coming with Acrosser’s 7 years product longevity service.

embedded systems ,gaming Platform ,single board computer
1. Intel LGA1155 Socket supports cross compatible with Intel Core i7/ i5/ i3 desktop processors
2. Supports Intel Xeon SP processors
3. Two 204-pin SO-DIMM sockets support DDR3 1333/ 1066 SDRAM up to 16GB
4. 6 x COM, 8 x USB2.0, 3 x SATA II, 8-bit GPIO, 1 x PCI-E x4, 1 x Mini-PCI-E

Slim Mini-ITX mainboard with Intel Atom chipset

AMB-D255T1, which carries the Intel dual- core 1.86GHz Atom Processor D2550. AMB-D255T1 features powerful graphic performance via VGA and HDMI, DDR3 SO-DIMM support, mSATA socket with USB signals and SIM slot, and a DC jack for easy power in. AMB-D255T1 also provides complete I/O such as 4 x COM ports, 6 x USB2.0 ports, 1 x GbE RJ-45 port, 1 x SATA port with power connector.

Acrosser designs AMB-D255T1 as the slim type with single layer I/O ports to make the board total height less than 20mm, with external AC/DC power adaptor which is very suitable for applications with limited space likes Digital Signage, POS or thin client system.

embedded system ,in vehicle computer ,Industrial PC
embedded system ,in vehicle computer ,Industrial PC

1. Intel D2550 Processor with NM10 Chipset

2. One 204-Pin DDR3 SO-DIMM Socket

3. 4 x COM, 6 x USB2.0, 1 x SATA II, 1 x Mini PCIe, 1 x GbE

4. Mini PCIe Expansion, SIM Card Socket

In-Vehicle Computers are featured with a remote power control switch beside the power control by ignition switch

Acrosser Technology, the leading industrial computer manufacturer, has successfully integrated significant features into their In-Vehicle Computer series products. These features include i-Button 1- wire interface, combo connector and remote power control switch.

embedded computer ,in vehicle computer ,single board computer
embedded computer ,in vehicle computer ,single board computer

 

i-Button 1-Wire Interface for Driver ID and Sensors

Driver identification, temperature sensors, NVRAM, digital I/O and analog input are quite often used on vehicle and M2M applications. 1-Wire is a device communications bus system designed by Dallas Semiconductor Corp. that provides low-speed data, signaling, and power over a single signal.
At this time, there are approximately 40 1-wire devices available from Dallas Semiconductor Corp. 1-Wire devices can be grouped by their functions into several categories:

‧Identification only
‧Identification plus temperature
‧Identification plus temperature logger
‧Identification plus temperature and humidity logger
‧Identification plus real time clock
‧Identification plus NV SRAM or OTP EPROM or EEPROM
‧Identification plus SHA-1 secure EEPROM

Thanks to the integration of 1-wire interface into Acrosser In-Vehicle Computers, so system integrators now can use one simple interface to connect variety devices which are often utilized in telematics applications. Beside the hardware interface, Acrosser also provide software API to write and read data to and from any kind of 1-wire devices.

 

Combo Connector Simplifies Many Cables Down to a Single Cable

Signals between a vehicle computer and a touch monitors include VGA, USB, audio and power supply of touch monitor. With a normal design, 4 cables are required. The all-in-one combo connector integrates all of these signals into one single cable. This significantly simplified the routing of the harness. Acrosser’s new in-vehicle computers and in-vehicle touch monitors are all featured with this advanced design.

 

Remote Power Control Switch, ON/OFF Control become More Flexible

All Acrosser’s In-Vehicle Computers are featured with a remote power control switch beside the power control by ignition switch. When this switch is installed and enabled by software, the switch works together with the ignition switch to control the power on/off of the computer. This has enabled the driver be able to turn off the computer without turning off the ignition. This feature is very useful in some application scenarios.

Visit Acrosser in Vehicle Computer solution and product web pages to know more information.