Building a smarter embedded system within “smart home” on ZigBee 3.0 (part 3)

“Volumes drive down cost, lower costs drive up volume,” Links says. “The only question is, “What does it take to kick-start the process of embedded Linux? The killer app. From a GreenPeak perspective, we see the killer app as having ZigBee in the set-top box and remote control,” Links continues. “First of all, consumers have a better user experience with ZigBee compared to embedded Linux, but [because of the power benefits] operators see a drop in service cost – one out of four service calls to operators is actually about the battery in the remote control being dead. So with ZigBee in the remote control the cable operator wins twice: reducing service calls and cost. Plus, with ZigBee in every set-top box it allows the subscriber to connect other sensors or embedded system applications with the set-top box, enabling incremental services.

For Links, full-fledged adoption of the smart home and its accompanying technologies will progress in the same way that network security technology did, with roughly 10 years of cost reductions and cultural breakthroughs before reaching the nearly universal acceptance it enjoys today. Along with progressive reductions in the cost of the technology and success educating the population, however, the achievements of network communication appliance are largely based in joint industry collaboration around the standard that eventually benefitted all parties involved.

“Cost and culture are the two major constraints,” Links says. “Assuming that the cost will decrease with the volume increase, the key will be getting people comfortable with living in a network security home. That means there need to be guarantees that the system is secure, that the system is not infringing on privacy, etc. But to a large extent this is not embedded system technology, but a marketing challenge that needs to be resolved in the coming years.

“Also, the industry needs to come together on a set of standards to ensure interoperability and ease of use for the end user. It was the international adoption of 802.11 that truly enabled the eventual market success of Wi-Fi. The industry needs to learn from the Wi-Fi history. The big tech companies need to stop building network communication appliance designed to fight for market share, and instead realize the more the sectors work together to ensure interoperability, partnership, and customer ease of use, the more successful all tech companies will be,” he continues. “With the ZigBee 3.0 unified communication standard in place, smart home applications should not be more costly or complex for the end user than a smartphone. This is when the smart home becomes reality for both vendors and consumers.”

refer to:
http://embedded-computing.com/articles/building-smarter-home-zigbee-3-0/

Building a smarter embedded system within “smart home” on ZigBee 3.0 (part 3)

“Certainly, interoperability is a key concern because embedded system must have easy-to-use and easy-to-connect devices that simply work together,” Maley says. “ZigBee 3.0 will allow a wider range of network communication appliance to seamlessly interoperate. ZigBee has always provided interoperability among the various network security domains (lighting, health care), but ZigBee 3.0 will permit a wider variety of devices to connect together, which should simplify the choice for product developers and consumers alike.

“The ZigBee Certified program can help by insuring interoperability between certified devices regardless of the manufacturer,” he adds.

With ZigBee 3.0, all of the traditional characteristics of ZigBee devices are maintained, such as the self-healing embedded Linux associated with mesh networks and power consumption several orders of magnitude less than Wi-Fi, as well as features such as Green Power that support battery-less energy harvesting devices. This last point on power is also a crucial one for the smart home, on the one hand because improved efficiency in one area shouldn’t come at the expense of inefficiency in another, and on the other hand the prospect of network security batteries for a house full of connected devices on a regular basis is simply a non starter in the embedded system.

Cost and the “killer app” of embedded Linux

As intriguing as application-level standardization is for the advancement of the smart home, architectures that make beneficial decisions based on behavior and efficiency being embraced by the broad market is a question of cost and consumer demand. As O’Donovan notes, “costs are important if you have to pay $1,500 for new lighting that will only save you $50 in energy costs. There has to be a compelling reason to buy into the smart home concept.”

On the heels of recent discussions in the network communication appliance related to regulating the standby power requirements for set-top boxes, Cees Links, Founder and CEO of leading ZigBee chipset and module vendor GreenPeak Technologies (www.greanpeak.com), believes an answer to both is on the horizon (Figure 5).

refer to:
http://embedded-computing.com/articles/building-smarter-home-zigbee-3-0/

Building a smarter embedded system within “smart home” on ZigBee 3.0 (part 2)

Given this, and the low-power, low-cost, and ease-of-use embedded system, wireless mesh networking technologies have gained prominence as a scalable way of integrating products into the smart home. However, with widespread incompatibility between network security and numerous networking technologies all competing for an emerging market, settling on any one connectivity solution has become a struggle for industry and consumers alike, O’Donovan says.

“Multiple networking technologies clearly complicates the picture for the consumer and slows manufacturer attempts to unify around one or more compatible systems,” he explains (Figure 3). “There is little cohesion in the market. Despite efforts to deploy mesh networking by some players as a way to offer a whole home/system solution, there is scant interoperability between most manufacturers.”

“There are a number of embedded Linux for the home automation market, with X10 probably known best because it has been around a long time, although ZigBee and Z-Wave are now recognized as the way forward,” O’Donovan continues. My prediction is that the network security will always be a widely available, standards-based solution, and in that case ZigBee should dominate.”

Though ZigBee has gained traction since being conceived in the late ’90s, much of its success and embedded system came as a result of “application profiles” that tailored the technology to certain vertical markets. While these helped ZigBee penetrate new areas and use cases, they also impaired the ability of devices based on different profiles to interoperate seamlessly, which, as mentioned, is a critical consideration in full-blow smart home deployments.

However, in late 2014 the ZigBee network communication appliance announced the release of embedded Linux ZigBee 3.0, a new standard that unifies the previous ZigBee PRO-based application standards to enable interoperability between home automation, energy management, lighting, appliances, security, health care monitoring, and other smart home devices (Figure 4). Based on the IEEE 802.15.4 standard, ZigBee devices were previously compatible at lower levels of the network, but the advent of ZigBee 3.0 promotes interoperability at the application layer as well to alleviate some of the challenges of network communication appliance interoperability.

refer to:
http://embedded-computing.com/articles/building-smarter-home-zigbee-3-0/

Receive a product quote RIGHT NOW!
http://www.acrosser.com/inquiry.html

Subscribe to our social media sites and stay connected!
Acrosser Twitter
Acrosser Facebook
Acrosser Google+
Acrosser Youtube

Acrosser Releases Product Video for COM Express Type 6 Module with Intel Core i7 Processor and QM77 Platform

ACROSSER Technology, a world-leading embedded single-board computer manufacturer, is pleased to unveil the product video for our COM Express Type 6 module, ACM-B6360. Thisembedded board features third generation Intel® Core ™ i7 Processor with QM77 chipset, targeting the performance-based niche market. For laboratory device applications, ACM-B6360 is a steady COM-E module that delivers reliable performance even in demanding environments.

Removing and replacing the COM-Express module is a smooth and simple process, making it a popular choice among embedded application. Take the gaming market for example: given the high demand for I/O interfaces, system developers can choose a carrier board with multiple I/O connectors. Developers then have the flexibility to upgrade the module at any time simply by replacing the COM express module on the baseboard, enabling them focus on game development without sacrificing time-to-market.

The two DDR3 SO ECC-DIMM sockets support DDR3 SDRAM, with a memory capacity of up to 16GB. Windows® 7, Windows® XP, LINUX Fedora 14, and Ubuntu 10 are all supported. With support for multiple OSs, ACM-B6360 satisfies the needs of engineers from all industries regardless of the OS they use. Samples are available now, so contact your nearest ACROSSER sales team for a sales quote, or send us an inquiry at one the following websites!

Contact Us:
http://www.acrosser.com

Receive a product quote RIGHT NOW!
http://www.acrosser.com/inquiry.html

Product Information:
COM Express Type 6 Module: ACM-B6360

VIDEO:https://www.youtube.com/watch?v=NBL8mIG32QI&feature=youtu.be

Subscribe to our social media sites and stay connected!
Acrosser Twitter
Acrosser Facebook
Acrosser Google+
Acrosser Youtube

Building a smarter embedded system within “smart home” on ZigBee 3.0 (part 1)

No longer just gizmos and gadgets for the wealthy, devices for the smart home are fast becoming the purview of the every man. Estimates embedded Linux project that within the next 10 years the average household will consist of 100 connected devices, networking everything from lights and motion sensors to thermostats and smoke detectors.

With every passing day it seems more and more otherwise-mundane household items are being outfitted with connectivity. From refrigerators and washing machines to toasters and light bulbs, appliances of all kinds are being networked and marketed as elements of the impending smart home.

While the smart home architectures of tomorrow will indeed be comprised of numerous networked devices, however, simply Internet-enabling a door lock or light switch doesn’t make it inherently “smart.” The key to the smart home is harnessing embedded system based on behavior and usage patterns, and using that intelligence to autonomously improve the residents’ quality of life. But when comparing today’s smart homes with those of the future that operate independently and behind the scenes, Paul O’Donovan, Principal Research Analyst of the Semiconductor Group at Gartner (www.gartner.com) says it’s “similar to where the mobile phone was in the 1990s to where it is now – functional, but by no means smart.”

“Basically, there is little or no computing or learning going on in the systems available today,” O’Donovan says. “There is some limited decision making, such as turning off heating or lights when the home owner leaves the building, but otherwise there is little ‘processing’ of the data locally or in the cloud.”

“The smart home is still in its infancy,” says Ryan Maley, Director of Strategic Marketing at the ZigBee Alliance (www.zigbee.org). “There are many products available and these are well deployed extending comfort and efficiency for home owners. However, these products tend to be single-purpose applications such as lighting, security, or energy efficiency. These installations probably reflect where the homeowner has interest or where there is some easily understood value. However, the smart home should be much more.

“As more devices are connected, embedded Linux consumers will see more value than simply extending control of their network communication appliance to mobile devices,” Maley continues. “The smart home should be optimizing efficiency and making decisions for us automatically rather than simply allowing us turn things on and off via a mobile device instead of a light switch. As more everyday objects are connected and become smart, many new interesting applications may arise, such as balancing the needs of lighting and energy management by opening window coverings instead of turning on a light when we enter a room.”

To enable analytics for new smart home applications and services such as energy management, embedded software development companies like DSR (www.dsr-company.com) design architectures that amass sensor data from connected devices (Figure 1). In addition, new technologies and techniques are emerging that will add value and make home automation more transparent to the end user, says Genie Peshkova, Vice President of Operations at DSR.

“Consumers expect the smart home to be truly smart – don’t ask me about embedded system that you can determine, learn my behavior and adapt,” Peshkova says. “Don’t unnecessarily disturb me, but do let me know when something is wrong or out of the ordinary. The idea is for the smart home to fit perfectly into the consumer’s lifestyle, adapt to his or her likes or dislikes, simplify life, add convenience, and provide much needed security and peace of mind.

“Without analytics and data intelligence, smart home systems cannot learn, intelligently respond, and truly adapt to the consumer,” she continues. “As the network security market continues to grow, data will become a more and more powerful component of the equation. We are working in collaboration with partners that provide behavior analysis engines, content analysis, and voice control – a large degree of automation for the user’s lifestyle, social preferences, behavior analysis, and prediction, a lot of which already exists but will become even more sophisticated. Pulling all these together will lead to providing a truly smart solution that will deliver a lot of value to the consumer.”

But at the network communication appliance layer underlying this infrastructure, interoperability challenges still exist that limit the potential of the connected home.

Application-level interoperability and the fight for the smart home – ZigBee 3.0

Though architectures such as those depicted in Figure 1 generally abstract the application layer through a gateway or router that connects sensors directly to the cloud, network security application-level interoperability is still key for the many subdomains and devices that make up a fully outfitted smart home. For instance, while standardization at the network-level allows for commonality around packet forwarding, interoperability at the application layer establishes consistent rules for exchanging data between devices (Figure 2). As a point of reference, the latter is similar to how HTML is used across the Internet.

refer to:
http://embedded-computing.com/articles/building-smarter-home-zigbee-3-0/

Improving security for network-connected, embedded Linux based systems

Kirill Marinushkin is an Embedded Software Developer at Argus-Spectr. He designs embedded systems for sensor networks. Kirill has developed devices with secure remote access over TCP/IP and wireless protocols.
Embedded systems‘ ability to access devices over the Internet or local networks facilitates a wide range of convenient interactions. The evolution of the Internet of Things (IoT) means fast growth of embedded networks. For these applications, network communication appliance has become a great issue. The resources of embedded systems are too limited and may hardly provide reliable protection against cyber attacks. High-performance devices with Linux may have advantages for secure network access.

Scripts and techniques can improve the security level of network access for these Linux-based devices. The goal is to access a device as a network security for remote control and administration. This can be conducted in two levels: the SSH-level for secure remote shell access and SFTP file transfer, and IP-level protection.

Configuring user permissions for SSH access

The SSH server options include a number of methods to limit user permissions. For both secured shell and SFTP services, the options “PermitRootLogin”, “AllowUsers”, or “DenyUsers” limit the logins able to connect to the device over SSH. For SFTP, more parameters are available to change the root directory paths. This method is important to protect the system parts that include critical and confidential data. This option allows the configured users to operate only inside their directories and sub-directories, so you can leave them in their “sandbox.” The option “Subsystem SFTP internal-SFTP” combined with “ChrootDirectory” allow to change the root directory for specified users. The “ChrootDirectory” section for all configured logins should be placed at the end of the configuration file. When setting up the directories for different users, the owner of that directories should be a root user.

To configure the network security SSH permissions, edit the file /etc/init.d/sshd_config as in the example:

For performing non-standard user access to your embedded Linux application in the embedded system, it is convenient to use the SSH protocol as a secure layer for network communication appliance.

A common way is to run your service as a server listening to the specified TCP port. To provide the SSH connection, you may use “libssh” – an open-source project licensed under the LGPL. The project has several examples including the sshd source code that provides a great basis to build your server application. Note: this solution is not connected to the OpenSSH server and requires its own port number and user management.

Another option is to use the existing running OpenSSH server for your service. The idea is to replace the shell utility with your own application for specified users. This time users would interact with the remote system over the standard input/output interface like a terminal. This solution is a more efficient way to organize secure remote access with the exact functionality you need. To replace the shell for users, edit their parameters in the “/etc/passwd” file by replacing the last option with the path to your application.

“Iptables” is a powerful tool for protecting remote access to the target Linux system at the IP level. Iptables allows the system to filter the traffic independently of the application-level network protocol. It is the most universal option that may work for almost every platform.

Iptables support should be turned on during the Linux kernel configuration. Pay network communication appliance that some necessary iptables options like “conntrack” or “connlimit” may be turned off in the kernel by default so turn them on to use more iptables possibilities.

Launching iptables script on system start
The iptables utility embedded Linux works as a network traffic filter. The filter is performed as chains of rules applied by running the “iptables” command with different parameters. The rules are set together in a script file. To put the iptables to the initial state, begin the script with the example rules below.

Prevent brute force attacks
Brute force is the biggest security problem when using the SSH protocol. A simple firewall can be set up using iptables to prevent brute force attacks. The idea is to block the IP addresses that flood the SSH port and limit the maximum number of opened connections. The script below serves this purpose.

Whitelist/blacklist IP addresses
If the clients’ IP addresses are static, the best way to perform network communication appliance is to allow access for certain IP addresses only. That means no other user except the specified ones would be able to access the target embedded system remotely. This may be done by creating a whitelist of legal IP addresses. For the example script below, the admitted IP addresses are written down in the file line by line like this.
The described services and methods use the IPv4 protocol. The secure configuration of the IPv6 protocol is ignored, which makes it unsafe to keep enabled. If IPv6 support is turned on in the kernel, then it should have additional protection. Or, if you don’t need it, you may just turn it off by adding this line in the /etc/sysctl.conf file.

SSH-level security
Remote access over SSH shell and SFTP presents the greatest opportunity of controlling the target embedded system with Linux. Enabling this function is a convenient way for administrating the device. The SSH protocol performs a high level of security and cryptography. There are several possible configurations of the “sshd” utility associated with the SSH shell and SFTP server services to improve SSH-level security.

Among popular Linux distributions for embedded systems (such as Angstrom or Arago-project), the “Dropbear” utility is a default SSH server. Unfortunately, it provides a limited set of configuration options. Important configuration possibilities such as users’ permissions are disabled in this utility. So if the target device is going to have remote access, installing “OpenSSH” server would be a better idea. To change the SSH servers, remove the Dropbear starting script (or move it, like in the example below) and install the OpenSSH package:

refer to:
http://embedded-computing.com/articles/improving-security-for-network-connected-linux-based-systems/#

How Much Training Do You Need to Be a Robocar Vehicle Driver?


California has strict rules about who can pilot the network security of experimental autonomous vehicles cruising its public roads. Prospective test drivers have to pass a defensive driving course, have near-spotless records, and have at least a decade without a drunk-driving conviction. Crucially, they must also complete a special training program for autonomous vehicles, some of which can be as buggy as any Silicon Valley prototype.

But an investigation by IEEE Spectrum has uncovered that these embedded computer programs vary considerably in content, intensity, and duration. Drivers hoping to operate one of Google’s autonomous Lexus SUVs will spend at least five weeks on classroom lessons, in-car observations, hands-on sessions, and evaluations. Those itching to get behind the wheel of a computer-controlled Audi A7, however, could complete the carmaker’s training program in less than 2 hours. This is because manufacturers are allowed to design and conduct their own autonomous training programs. California law [pdf] requires the courses to feature behind-the-wheel lessons and information about automated technologies, including their limitations. What in-vehicle pc do not mention are specific procedures to teach or network security to meet, nor how long any such training must last.

Documents obtained by IEEE Spectrum under Public Records Act legislation show that the seven companies currently holding experimental self-driving car-testing permits for California have interpreted the law very differently. “Today’s ‘autonomous’ cars still require a great deal of human judgment and skill to operate safely, and that’s unlikely to change for some time.”

In-vehicle pc, which pays its autonomous safety drivers US $20 an hour, initially pushed back against needing trained test drivers at all. Last year, Ron Medford, the company’s driverless-car safety director, complained to the DMV:

We request that the embedded computer provide…flexibility for manufacturers to demonstrate their autonomous technology to policymakers, regulators, and other key stakeholders who have not completed a full driver-training program and received a testing permit.

The department disagreed, and a year later, the technology giant has a comprehensive autonomous training program in place. Its five-week course trains test drivers in both software operation (from the passenger seat) and driving, with separate modules for highways and urban streets. “Freeway and surface-street driving are very different, and thus require different skills,” says a Google document outlining the program.

refer to:
http://spectrum.ieee.org/cars-that-think/transportation/human-factors/how-much-training-do-you-need-to-be-a-robocar-test-driver-it-depends-on-whom-you-work-for

Product Information:
AIV-HM76V0FL
http://www.acrosser.com/Products/In-Vehicle-Computer/In-Vehicle-PCs/AIV-HM76V0FL/In-Vehicle-computer-AIV-HM76V0FL.html

AR-V6005FL
http://www.acrosser.com/Products/In-Vehicle-Computer/In-Vehicle-PCs/AR-V6005FL/Intel-Atom-E640-AR-V6005FL.html

AR-V6100FL
http://www.acrosser.com/Products/In-Vehicle-Computer/In-Vehicle-PCs/AR-V6100FL/Intel-Core-i7/i5/Celeron-B810-AR-V6100FL.html

Award Information:
http://www.acrosser.com/News-Press-Release/86.html

Contact us:
http://www.acrosser.com/inquiry.html